Name: ATen CV100KM
Brand: ATen
SKU: 788981
Rating: 87 (1 reviews)

manualATen CV100KM

Overview

The CV-100KM is a PS/2 keyboard and mouse emulator

designed to provide a simple, inexpensive solution to common

problems associeated with KVM (keyboard, video, mouse),

switches. It permanently cures damaging computer lock-up

commonly found in those KVM switches that do not provide

keyboard and mouse emulation. With those switches, the

computers ’lose’ the keyboard and/or mouse when the focus

switches to a different system.

Simply plug the emulator into the computer’s keyboard and

mouse ports, and the CV-100KM’s state-of-the-art

microprocessor appears to the system as if there were an actual

keyboard and mouse present. The computer boots and operates

normally, with or without the presence of a real keyboard and

mouse.

Because the CV-100KM’s circuitry allows seamless and fail-safe

hot plugging of the keyboard and mouse, you can hot swap the

two peripherals among any number of computers at any time.

The emulator works with just the keyboard or just the mouse

present, as well.

Features

M Prevents comptuer lockup due to keyboard signal loss with

KVM switches

M Allows hot plugging of the keyboard and mouse

M Allow keyboardless/mouseless boot and run - for increased

security

M Non-powered - uses the computer’s keyboard power source

M For KVM devices that do not provide keyboard and mouse

emulation

System Requirements

PS/2 Keyboard and Mouse ports installed on your

computer or KVM switch.

Top View

1. Mouse and Keyboard Ports

The cables from your PS/ 2 Mouse and PS/ 2 Keyboard plug

in here. Each port is marked with an appropriate icon to

indicate which one it is.

Note: If you are using a KVM switch, the keyboard and

mouse connectors from the KVM cable plug in here.

2. Mouse and Keyboard LEDs

The LEDs light to show that the peripheral has connected to

the computer. The corresponding LED flashes when the

keyboard or mouse transmits data.

3. Mouse and Keyboard Connectors

These connectors plug into the keyboard and mouse ports of

your computer. Each connector is marked with an appropriate

icon to indicate which one it is.

Bottom View

1. Wake Up Switch

M If your keyboard has Wake Up capability, you can bring

the computer back from power saving mode, by pressing

its Wake Up key, or by tapping the Right Shift key.

M If your keyboard does not have Wake Up capability, press-

ing this Wake Up switch brings the computer back from

power saving mode.

NOTE: This equipment has been tested and found to comply

with the limits for a Class B digital device pursuant to Subpart

J of Part 15 of FCC Rules. These limits are designed to

provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

M Reorient or relocate the receiving antenna.

M Increase the separation between the equipment and re-

ceiver.

M Connect the equipment into an outlet on a circuit different

from that which the receiver is connected.

M Consult the dealer or an experienced radio/television tech-

nician for help.

- 2 -

- 1 -

- 3 -

Ver el manual de ATen CV100KM aquí, gratis. Este manual pertenece a la categoría cables para ordenadores y periféricos y ha sido calificado por 1 personas con un promedio de 8.7 . Este manual está disponible en los siguientes idiomas: Inglés . ¿Tienes alguna pregunta sobre ATen CV100KM o necesitas ayuda? Haz tu pregunta aquí

¿Necesitas ayuda?

¿Tiene alguna consulta sobre el ATen y la respuesta no está en el manual? Haga su consulta aquí. Proporcione una descripción clara y completa de su problema y su consulta. Cuanto mejor describa su problema y consulta, más fácil será para otros propietarios de ATen proporcionarle una buena respuesta.

Número de preguntas: 0

General

	ATen
	CV100KM \| CV100KM-AT
	cables para ordenadores y periféricos
	5051964601098, 0672792151453, 4710423770065
	Inglés
	Manual de usuario (PDF)

Desempeño

Color del producto	Blanco
Material de la carcasa	Plástico
Certificación	RoHS

Condiciones ambientales

Intervalo de temperatura operativa	0 - 50 °C
Intervalo de temperatura de almacenaje	-20 - 60 °C

Puertos e Interfaces

Conector 1	2 x PS/2 (M)
Conector 2	2 x PS/2 (F)
Género del conector 1	Macho
Género del conector 2	Hembra

Otras características

Número de productos incluidos	1 pieza(s)
Cantidad de puertos	2
Compatible con Mac	No

Peso y dimensiones

Altura	23 mm
Profundidad	82 mm
Peso neto	80 g
Ancho	55 mm

Características

Color del producto	Blanco
Conector 1	2x 6-p Mini-DIN
Conector 2	2x 6-p Mini-DIN
Género del conector 1	Macho
Género del conector 2	Hembra

Empaquetado

Número de productos incluidos

1 pieza(s)

¿No puede encontrar la respuesta a su consulta en el manual? Puede encontrar la respuesta a su consulta en las preguntas frecuentes sobre el ATen CV100KM más abajo.